|
|
|
|
|
|
|
|
|
Stone Care
As a recognized member of both the Marble Institute of America and the National Tile Contractors Association, United Marble Fabricators / United Tile America takes a different approach to designing, selling, and installing natural stone surfaces. We pride ourselves on customer education; we want you to understand all the facets of your investment to insure your complete satisfaction. Stone is a product of the earth, and simple care and maintenance will keep it looking beautiful. Here are some recommendations for routine care and cleaning. Precautions Use coasters under all glasses, particularly those containing alcohol or citrus juices. Many common foods and drinks contain acids that will etch or dull the stone surface. Do not place hot items directly on the stone surface. Use trivets or mats under hot dishes and placemats under china, ceramics, silver or other objects that can scratch the surface. Cleaning Procedures & Recommendations Floor Surfaces Dust mop interior floors frequently, using a clean, non-treated dry dust mop. Sand, dirt and grit do the most damage to natural stone surfaces due to their abrasiveness. Mats or area rugs inside and outside an entrance will help to minimize the sand, dirt and grit that will scratch the stone floor. Be sure that the underside of the mat or rug is a non-slip surface. Normally, it will take a person about eight steps on a floor surface to remove sand or dirt from the bottom of their shoes. Do not use vacuum cleaners that are worn. The metal or plastic attachments or the wheels may scratch the surface. Other Surfaces Clean stone surfaces with a few drops of neutral cleaner, stone soap (available at our showroom), or a mild liquid dishwashing detergent and warm water. For best results, use a clean rag mop on floors, and a soft cloth for other surfaces. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently. Do not use scouring powders or creams; these products contain abrasives that may scratch the surface. Bath and Other Wet Areas In the bath or other wet areas, soap scum can be minimized by using a squeegee after each use. To remove soap scum, use a non-acidic soap scum remover or a solution of ammonia and water (about 1/2 cup ammonia to a gallon of water). Frequent or over-use of an ammonia solution may eventually dull the surface of the stone. Vanity Top Surfaces Vanity tops may need to have a penetrating sealer applied. Check with our staff for recommendations. A good quality marble wax or non-yellowing automobile paste wax can be applied to minimize water spotting. Food Preparation Areas In food preparation areas, the stone may need to have a penetrating sealer applied. Check with our staff for recommendations. If a sealer is applied, be sure that it is non-toxic and safe for use on food preparation surfaces. If there are questions, check with the sealer manufacturer. Do's
|
In The News: • O.C. Register Article Helpful Links: • Stone Care • A Brief History of Marble • Stone Fabricators Insight
|